Techno GR F3S-TGR-SB-K2C-500 Series User Manual Download Page 2

F3S-TGR-SBx-KxC series User’s 

manual 

 

 

3

 

READ AND UNDERSTAND THIS MANUAL 

  

Please read and understand this manual before storing, installing, operating, 
maintaining, or disposing of the product. 
Please consult your TECHNO GR representative if you have any questions or 
comments.

 

 

WARRANTY 

 

TECHNO GR's exclusive warranty is that the products are free from defects in 
materials and workmanship for a period of one year (or other period if specified) from 
date of sale by TECHNO GR. 
TECHNO GR MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR 
IMPLIED, REGARDING NONINFRINGEMENT, MERCHANTABILITY, OR FITNESS 
FOR PARTICULAR PURPOSE OF THE PRODUCTS. 
ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE 
HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE 
REQUIREMENTS OF THEIR INTENDED USE. 
TECHNO GR DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. 
 

LIMITATION OF LIABILITY 

 
TECHNO GR SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR 
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN 
ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS 
BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. 
 
In no event shall responsibility of TECHNO GR for any act exceed the individual price 
of the product on which liability is asserted. 
 
IN NO EVENT SHALL TECHNO GR BE RESPONSIBLE FOR WARRANTY, REPAIR, 
OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS TECHNO GR'S 
ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, 
STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO 
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR 
REPAIR.

 

 
 

F3S-TGR-SBx-KxC series User’s 

manual 

 

 

4

 

 

SUITABILITY FOR USE 

 

TECHNO GR shall not be responsible for conformity with any standards, codes, or 
regulations that apply to the combination of products in the customer's application or 
use of the product. 
 
At the customer's request, TECHNO GR will provide applicable third party certification 
documents identifying ratings and limitations of use that apply to the products.  
This information by itself is not sufficient for a complete determination of the suitability 
of the products in combination with the end product, machine, system, or other 
application or use. 
 
The following are some examples of applications for which particular attention must be 
given. This is not intended to be an exhaustive list of all possible uses of the products, 
nor is it intended to imply that the uses listed may be suitable for the products: 
 

• 

Outdoor use, involving potential chemical contamination  or  electrical      
interference or conditions or 

use 

not described in this document. 

• 

Nuclear energy control systems, combustion systems, railroad systems, 
aviation systems, medical equipment, amusement machines, vehicles, and 
installations subject to separate industry or government regulations. 

• 

Systems, machines, and equipment that could present a risk to life or 
property. 

 
Please know and observe all prohibitions of use applicable to the products. 
 
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK 
TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE 
HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE TECHNO GR 
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE 
WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 
 

NOTE:

  Some specifications of the products may be changed without any notice. 

 
Special model numbers may be assigned to fix or establish key specifications for your 
application on your request. 
Please consult with your TECHNO GR representative at any time to confirm actual 
specifications of purchased products.

 

 

Summary of Contents for F3S-TGR-SB-K2C-500 Series



















Reviews: