26
Call: 1-631-648-7481 or Visit: support.technocnc.com
27
HD II Tabletop Manual
NK105G2
Call: 1-631-648-7481 or Visit: support.technocnc.com
HD II Tabletop Manual
NK105G2
www.technocnc.com
(HTT06091113)
Tel: 631-648-7481
9/2015
Techno CNC Systems, LLC., Terms and Conditions
For Limited Warranty and Repairs Warranty
WARRANTY
All Techno CNC Systems, LLC., mechanical components are warranted against manufacturer’s defects in material
and workmanship for a period of one (1) year from the time of shipment from Techno CNC Systems, LLC., facilities. All
Techno CNC Systems, LLC., electrical components are similarly warranted for a period of one (1) year from the time of
shipment from Techno CNC Systems, LLC., facilities. Techno CNC Systems, LLC.,’s sole obligation under this warranty
is limited to repairing the product or, at its option, replacing the product without additional charge, provided the item is
properly returned to Techno CNC Systems, LLC., for repair as described below. The provisions of this warranty shall
not apply to any product that has been subjected to tampering, abuse, improper setup or operating conditions, misuse,
lack of proper maintenance, or unauthorized user adjustment. Techno CNC Systems, LLC., makes no warranty that its
products are fit for any use or purpose to which they may be put by the customer, whether or not such use or purpose
has been disclosed to Techno CNC Systems, LLC., in specifications or drawings previously or subsequently provided,
and whether or not Techno CNC Systems, LLC.,’s products are specifically designed and/or manufactured for such a
purpose. NOTE: Drive motors (servo or stepper) are considered “mechanical components”.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. ALL OTHER WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, WHETHER EXPRESSED, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR
COURSE OF DEALING, ARE HEREBY DISCLAIMED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND
THE DESCRIPTION ON THE FACE HEREOF.
LIMITATION OF REMEDY
In no event shall Techno CNC Systems, LLC., be liable for any incidental, consequential, or special damages of any kind
or nature whatsoever. Techno CNC Systems, LLC., is in no way liable for any lost profits arising from or connected to this
agreement or items sold under this agreement, whether alleged to arise from breach of contract, expressed or implied
warranty, or in tort, including, without limitation, negligence, failure to warn, or strict liability.
RETURN PROCEDURE
Before returning any equipment in or out of warranty, the customer must first obtain a return authorization number and
packing instructions from Techno CNC Systems, LLC.,. No claim will be allowed nor credit given for products returned
without such authorization. Proper packaging and insurance for transportation is solely the customer’s responsibility.
After approval from Techno CNC Systems, LLC., the product should be returned with a statement of the problem and
transportation prepaid. If, upon examination, warranted defects exist, the product will be repaired or replaced at no
charge, and shipped prepaid back to the customer. Return shipment will be by common carrier (i.e., UPS). If rapid delivery
is requested by customer, then such transport is at the customer’s expense. If an out-of-warranty situation exists, the
customer will be notified of the repair costs immediately. At such time, the customer must issue a purchase order to
cover the cost of the repair or authorize the product to be shipped back as is, at the customer’s expense. In any case, a
restocking charge of 20% will be charged on all items returned to stock.
FIELD SERVICE
Repairs are ordinarily done at Techno CNC Systems, LLC.,’s Ronkonkoma, New York facility, where all necessary
instrumentation is available. This instrumentation is difficult to transport, so field service is severely limited, and will only
be supplied at Techno CNC Systems, LLC.,’s discretion. If field service is required and is performed at Techno CNC
Systems, LLC.,’s sole discretion, all relevant expenses, including transportation, travel time, subsistence costs, and the
prevailing cost per hour (eight hour minimum) are the responsibility of the customer.
UNFORESEEN CIRCUMSTANCES
Techno CNC Systems, LLC., is not liable for delay or failure to perform any obligations hereunder by reason of circumstances
beyond its reasonable control. These circumstances include, but are not limited to, accidents, acts of God, strikes or labor
disputes, laws, rules, or regulations of any government or government agency, fires, floods, delays or failures in delivery
of carriers or suppliers, shortages of materials, and any other event beyond Techno CNC Systems, LLC.,’s control.
ENTIRE AGREEMENT/GOVERNING LAW
The terms and conditions contained herein shall constitute the entire agreement concerning the terms and conditions
for the limited warranty described hereunder. No oral or other representations are in effect. This Agreement shall be
governed in all respects by the laws of New York State. No legal action may be taken by any party more than one (1)
year after the date of purchase.
TECHNO CNC SYSTEMS, LLC., RESERVES THE RIGHT TO CHANGE DESIGNS, SPECIFICATIONS, PRICES, AND
ANY APPLICABLE DOCUMENTATION WITHOUT PRIOR NOTICE.
HD II Tabletop Settings
Website:
support.technocnc.com
| Call: 631-648-7481
P a g e
|
7
2.
English
2. Export Log
3. System Update
4. Register
5. Help
Spec: Help Message Show Delay
Value: 6000
Unit: S
6. Reboot
7. Exit
8. Diagnosis
1.
System Info
1. Software Version
2. Card No
3. Remaining Time
4. Register Tmes
2.
Port List
3.
Keypress Diag
4.
Import Diag
5.
Outport Diag
