TECHNISONIC INDUSTRIES LIMITED
TMS-110 Installation and Operating Instructions
TiL 15RE532 rev. D
16
3.6
CONFIGURATION MENU
The Configuration Menu is invoked by pressing the 0 key in the function menu. The display will
respond with ‘Config’. Turn the knob to select the desired item and press the knob to edit the
item. Configuration menu items include:
Mem Disp
Allows the format of the display for programmed channels to be selected:
Freq
Displays the frequency on the top line only.
Freq-#
Displays the frequency on the top line and the channel
number on the bottom line.
Freq-Name
Displays the frequency on the top line and the name of
the channel on the bottom line.
Name-#
Displays the channel name on the top line and the
channel number on the bottom line.
AlwaysOn
Power switch configuration:
No
Knob must be used to turn the radio on and off.
Yes
Radio is always on when power is applied.
Comp Lvl
Microphone compression level. Turning the knob will adjust (range 0 – 1023)
the maximum gain of the microphone input.
Ext Spkr
External speaker operating mode:
Off
External speaker output is off at all times.
Rx Only
External speaker outputs receive audio only.
Rx & Tx
External speaker outputs receive and transmit audio.
Ext Vol
External speaker volume mode:
IntSpkr=
External speaker volume is equal to the internal speaker.
Separate
External speaker volume is separately adjustable.
FrqAgile
Frequency agile mode:
No
Only programmed channels can be selected.
Yes
Programming and direct frequency entry is allowed.
HdstMute
Headset mute mode:
No Spkr
Neither speaker is muted when the headset plug inserted.
Int Spkr
Only the internal speaker is muted when the headset plug
is inserted.
Ext Spkr
Only the external speaker output is muted when the
headset plug is inserted.
BothSpkr
Both internal and external speakers are muted when the
headset plug is inserted.
Mod Lvl
Modulation level. Adjusts the transmit modulation level. (range 0 – 2250)
Mon Vol
Monitor volume. Adjusts the level of the monitor output. (range 0 – 255)
Scan Mon
Scan monitor time. Adjusts the number of seconds (0 – 90) the radio will
remain on an open frequency during scanning.
ScanRply
Scan reply time. Adjust the number of seconds (0 – 90) the radio will stay on a
frequency after the squelch has closed before resuming scanning.
ScanRvrt
Scan revert mode:
Selected
All replies are transmitted on the frequency selected
before scanning was enabled.
Contacted
All replies are transmitted on the frequency of the last
channel received.
Tx Timer
Transmit timer. Selects the transmit timeout timer between Off, 30, 60 or 90
seconds.
Table 3.
Configuration Menu Commands
