TECHNISONIC INDUSTRIES LIMITED
TMS-110 Installation and Operating Instructions
TiL 15RE532 rev. D
15
3.5
FUNCTION MENU
The Function Menu is invoked by pressing the enter key. The display will respond with ‘Menu #’.
Press one of the following keys for the associated function:
Begin entry of transmit frequency. Current channel will be modified with new
transmit frequency, receive frequency will remain unchanged allowing for split
frequency operation.
Enable or disable scanning for the currently selected channel.
Enable or disable transmit for the selected channel. Allows for receive only
channels to be defined.
Edit the text name for the currently selected channel. Rotate knob or use up/down
keys to select character under cursor. Press the knob or ENT key to proceed to
the next character. Text will be saved after the last character is set.
Toggle seek mode on or off. Channels enabled in function 2 will be scanned until
an active channel is encountered at which point the seek mode will set to off and
normal operation will resume.
Toggle scan mode on or off. Channels enabled in function 2 will be scanned until
an active channel is encountered. The radio will stay on that channel for a time
programed in the configuration menu. Transmit is possible during scanning, the
frequency depends on the mode programed in the configuration menu. Scanning
will continue indefinitely until function 6 is selected to toggle scan mode off.
Toggles transmit power low or high. (1 watt or 10 watts)
Copy current channel to a new specified channel. The radio will prompt you for
the new channel number. The current channel will remain unchanged.
Adjust display and back lighting brightness. When selected, the knob becomes
the brightness control.
Enter configuration menu. See
3.6 CONFIGURATION MENU
.
Read channel or configuration data from USB storage device into radio.
Save channel or configuration data to USB storage device from radio.
