TECHNISONIC INDUSTRIES LIMITED
TMS-110 Installation and Operating Instructions
TiL 15RE532 rev. D
10
2.7 INSTALLATION – MOUNTING BRACKET
Mount the bracket to the vehicle as required with the two #6 x ¾” self-tapping screws.
The radio may be mounted above or the below the bracket depending on the installation. Use the
four 8-32 x 5/16” black screws to attach the radio to the bracket. The bracket has slots to allow
the angle to be adjusted.
2.8 INSTALLATION – MICROPHONE
Connect the supplied microphone to the radio by plugging in the RJ-45 connector into the front
panel underneath the knob until it clicks.
The mic clip can be installed on the radio or elsewhere in the vehicle. There are holes for vertical
or horizontal mounting on either side of the radio using the two 6-32 x ¼” screws supplied.
