4-10
Example:
Press
117.975 is displayed on screen.
Press
118.000 is displayed on screen.
Press
138.000 is displayed on screen.
After keypad entry of a desired frequency, normal Tx/Rx operation can begin or the frequency can be
stored as a channel as described in paragraph 4.3.5.
4.3.5 Storing a Frequency to a Channel
Up to 26 Frequencies can be stored and recalled in channels 00 to 25 as follows:
1.
Enter the frequency to be stored as described in paragraph 3.3.4 followed immediately by
pressing "E" and the desired Channel number "##". The channel number must always consist
of two digits ie/ channel 1 must be entered as “01", channel 0 as “00", etc.
NOTE
"E","##" must be pressed within 5 seconds of
entry or frequency will not be stored.
Examples:
Press
Frequency117.975MHz is stored as channel 00.
Press
Frequency 128.100 MHz is stored as channel 01.
Press
125.000 MHz as channel 23.
4.3.6 Recalling a Stored Channel
To recall the permanently stored emergency channel 121.500 MHz press "E","0". Press "R","##".
The frequency stored as the channel indicated will be displayed on the screen.
Summary of Contents for TiL-91-DE/8.33
Page 29: ...4 14 Figure 4 3 Fixed Channel Jumper Locations...
Page 32: ......
