3-4
(5)
Refer to Section 4 for transceiver specific operating modes.
3.5
Switching OFF
To switch off the Low Cost Base Station:
(1)
Set the POWER ON/OFF on transceiver to switch to OFF.
(2)
Verify that all indicator LED's on the front panel are OFF.
(3)
Set the External Battery ON/OFF switch on the SPG-O10 Power Supply to OFF.
(4)
Set the AC ON/OFF Power Switch on the SPG-010 Power Supply/Battery Charger to the
OFF position.
3.6
Battery Charging
(1)
Set AC ON/OFF switch to OFF.
(2)
Set External Battery ON/OFF switch to OFF.
(3)
Connect the batteries to be charged, to the appropriate terminals located on the rear of the
SPG-010 Power Supply/Charger.
(4)
Set AC ON/OFF switch to ON.
(5)
Set External Battery ON/OFF switch to ON.
The following battery back-up kit is available for use with the TLC-150 or TLC-100 base station:
P/N 989979-2
12 Volt Battery Back-up Kit (7.2 AH)
Provides a minimum of 6.5 hours back-up for 7 watt unit with 20% Tx and 80% Rx duty cycle.
Kit includes:
qty. (1) p/n 027330-1, DC mating cable with battery connectors.
qty. (1) p/n LCR 12V7.2P, 7.2 amp hour sealed lead acid battery.
qty. (1) packing log/ instructions.
Summary of Contents for TiL-91-DE/8.33
Page 29: ...4 14 Figure 4 3 Fixed Channel Jumper Locations...
Page 32: ......
