63
Technical data UVR1611 (Relay version)
All sensor inputs
For temperature sensors of type KTY (2 k
Ω
/25°C), PT1000 and room
sensors RAS or RASPT, radiation sensors, voltages up to 5V DC, as well
as digital input
Sensor input 8
Additional for current loop (4 -20 mA), voltage (0-10 V DC) or resistance
(0-12.50k
Ω
)
Sensor input 15, 16
Additional pulse input, such as for volume flow encoder
Output 1- 4, 6-11
Relay outputs, partially with opener and closer
Output 5
Change-over contact relay –
potential free
Outputs 12, 13
Accommodation for later expansions by a double auxiliary relay module
Output 14
Data link (DL bus) to capture suitable sensors and log data (in special
cases configurable with 12V relay as switch output)
Max. bus load (DL bus) 100 %
Outputs 15,16
Analogue outputs 0-10V/20mA or PWM (10V/2kHz)
CAN- Bus
Data 50 kb/sec., power supply for external units 12V= / 100mA
Differential tempera-
tures
Equipped with separate switch-on/off differential
Threshold values
Partially set up with an adjustable hysteresis or as an alternative with
separate switch-on/off threshold
Temperature display
-50 until +199°C with a dissolution of 0.1K
Accuracy
Typ. 0.4 and max. +-1K for the range of 0 - 100°C
Max. breaking capacity Relay outputs max. each 230/ 3A
Connection
230V, 50- 60Hz, (outputs and units are fused along with 6.3A quick-
acting)
Supply cable
3x 1mm² H05VV-F conforming to EN 60730-1 (corresponding cable with
safety plug contained in the basic package)
Power draw
Max. 4.2 W (without accessory equipment)
Protection
IP40
Permissible ambient
temperature
+5 to +45°C
Standard delivery
UVR1611K-N
: The UVR1611, console including all terminals, while attachment material, strain reliefs,
operating instructions
UVR1611S-N
: Device with terminal mounting plate, operating instructions.
