Basics
6
Basic standards
Basic operation
Display
The display consists of four information fields
The top line
constantly provides information about the actual output states.
Blank field instead of number 5 = output five has not yet been parameterized
Output five is active, runs in automatic mode and is temporarily
switched off
Output five is active, runs in automatic mode and is temporarily
switched on
Output five is active, runs in
manual mode
and is temporarily switched off
Output five is active, runs in
manual mode
and is switched on at the moment
The second line
is the headline for the following menu and/or parameter lines
.
The middle display area
is the operative range. Within this range the programming, parameterizing
and indicating takes place.
The lowest line
exclusively serves to mark the two keys below in order to be able to assign different
functions to it.
Keys
The control unit has two keys below the display. They are constantly assigned with the required func-
tions via the display.
x10
– The changeable value changes for 10 steps each per increment of the scroll wheel.
BROWSE
– This function allows the direct “switch" from one menu level to the same level of the next
menu by means of the scroll wheel
MENU
– To switch from the opening image (after starting-up) to the menu
SERVICE
– To switch from the function overview (the most important menu for the user) into all other
menus
BACK
– The PC switches immediately into the next-higher menu level
CANCEL
- The current entry or change of a value is stopped
