5
Setting up the RAS-F (/F) room sensor
The battery supplied for the sensor must be inserted before commissioning.
Coupling the receiver to the wireless sensor
Push-buttons and 4 LEDs are used to couple the receiver to the particular wireless sensor.
The 4 LEDs display a binary system, therefore:
the first LED has the value
8
,
the second LED has the value
4
,
the third LED has the value
2
and
the fourth LED the value
1
.
Therefore a maximum of 15 addresses can be specified for wireless sensors.
Address
1st LED
Value 8
2nd LED
Value 4
3rd LED
Value 2
4th LED
Value 1
1
☼
2
☼
3
☼
☼
4
☼
5
☼
☼
6
☼
☼
7
☼
☼
☼
8
☼
9
☼
☼
10
☼
☼
11
☼
☼
☼
12
☼
☼
13
☼
☼
☼
14
☼
☼
☼
15
☼
☼
☼
☼
Receiver (opened):
4 display LED’s
Sequence from left to right:
8 4 2 1
Coupling button
DL bus connection
(Wires can be connected either way.)
Wire routing inside in the housing as
short as possible!
