40
Function overview
The function overview is
freely designed
by the programmer and can therefore look different on every
system.
It can be displayed with the aid of
graphics
or simply as a
table
.
Values selected by the programmer can be changed either by all users, by Experts only or by Experts
and Technicians. Many values (e.g. sensor values) can generally never be changed.
If multiple UVR16x2 controllers or other X2 devices in the system are linked by CAN bus, the function
overview can also be programmed to display the values of other devices.
The function overview can comprise several pages, in which case a
Link
(= link on the screen linking
to another page) is required for switching to a different page. The appearance of links can be freely
designed by the programmer. Access to some pages may be restricted to certain user groups (with or
without password entry).
The function overview can be programmed with the first page showing an overview of the following
pages with links to those pages.
Touching the relevant link takes you to the display on the required page.
If a function overview was loaded onto the CAN monitor, the display will show the function overview
once it is connected to the CAN bus.
From the main menu, you can access the function overview by tapping the
button.
The function overview can be programmed as standard view or full screen view.
Standard view
Example
:
Start page with 4 links
You can go back to the page
displayed
previously
by tapping
.
To go to the
start page
of the function overview, tap
.
From the
start page
(= first page), tapping
takes you to the CAN monitor's
main menu
. If only
technicians
or
experts
are permitted to access the menu, then the relevant
password
must be
entered.
Summary of Contents for CAN-MTx2
Page 2: ......
