22
CAN digital outputs
They are defined by specifying the
source
in the CAN monitor.
Example
: Source "Sensor error inputs"
Designation
Every CAN digital output can be given its own designation. The designation can be selected from var-
ious designation groups or can be user defined.
Example
:
Transmission condition
Example:
If change Yes/No
Transmission of the value if a status change occurs
Blocking time 10 s
If the value changes within 10 seconds of the last transmission, the value
is nevertheless only transmitted again after 10 seconds (minimum
setting: 1 sec.).
Interval time 5 m
The value is transmitted every 5 minutes even if it has not changed since
the last transmission (minimum setting: 1 minute).
Summary of Contents for CAN-MTx2
Page 2: ......
