28
Filter
By setting one or more filters, you can limit the display to certain channels that fulfill the desired criteria.
>
Highlight the
Filter
option and press the
OK
button.
>
Now select the desired filter group and press the
OK
button once more.
>
Now select the desired filter option from the list that appears and confirm the selection using the
OK
button.
The channel list now only shows the channels that fit the desired criteria.
In order to filter the list further, follow the above steps again and set more filters this way.
To remove all filters
>
Open the Options menu using the
OPT
button.
>
Select the
Filter
option and press the
OK
button.
>
Now select
[Reset all filters]
and press the
OK
button.
The full channels list is now displayed again.
8.3.4 Calling up blocked channels
If a channel is selected that is blocked by the parental control function, the
device
PIN
message will be
displayed on the screen.
>
Use the
numeric keypad keys
to enter the device PIN.
The selected channel can now be viewed.
or
>
Switch to a channel that is not blocked.
If glob al parental control is enabled, the device PIN code will be requested again when the blocked
channel is switched on. To make things easier for you, you only need enter the PIN code once during
each operating phase.
When doing so, pay careful attention to the information and settings for global and user-dependent
parental control (TechniFamily) in the operating manual.
Summary of Contents for TECHNISTAR K4 ISIO
Page 1: ......
