22
7.4 Changing a setting
You can create settings using the
arrow selection method
, the
selection list
, by
entering numbers
and
by using the
virtual keyboard
. The device specifies the method that can be used to change a highlighted
setting. This is evident on account of the following displayed symbols:
-
Arrow selection method
(Section 7.4.1)
Arrows are shown on the left or right edge of the highlight.
-
Selection list
(Section 7.4.2)
The symbol is shown on the right edge of the highlight.
-
Entering numbers
(Section 7.4.3)
-
Virtual keyboard
(Section 7.4.4)
The symbol is shown on the right edge of the highlight.
7.4.1 Arrow selection method
>
If is shown on the left and
on the right next to the set value, you can alter this using the
left/right
arrow keys
.
7.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the selection list.
>
Press the
OK
button to open the selection list.
>
Highlight the s etting you want using the
up/down arrow keys
.
By pressing the
up/down arrow keys,
it is possible to move the highlight from line to line and to
move
upwards and downwards page by page
using the page up/down buttons.
>
Confirm by pressing the
OK
button. The selection list closes again and the selected setting is shown in
the menu.
Summary of Contents for TECHNISTAR K4 ISIO
Page 1: ......