74
74
>
After you have changed the configuration, press the
green
function key (
Accept
).
The installed satellites are now displayed again so you can check them.
>
To accept the setting press the
green
function key (
Accept
); to make further
changes, press the
yellow
function key (
Modify
).
Antenna configuration (DVB-T)
When using an active DVB-T antenna that does not have its own power supply, or if you do
not want to use this, your TV’s antenna amplifier can be supplied via the coaxial cable by
activating the
Antenna supply
.
In this step a channel spectrum is displayed with signal levels for the channels, which you
can use to adjust your DVB-T antenna for optimum reception.
> Use
the
right/left arrow keys
to switch the voltage supply
on
or
off.
>
Confirm the setting by pressing the
green
function key (
Accept
).
Channel search
>
To run a channel search for all activated sources, use the
up/down arrow keys
to
highlight the
All Channels
or
All unencrypted hannels
field.
> Pressing
the
green
function key (
Start
) launches the channel search.
Initial installation
Summary of Contents for TechniLine 32 HD
