TechniSat TechniLine 32 HD, Quick Start Manual And Warranty Documentation

Page: 73 / 92

DE
73
DE
73
Selection of reception signals
> Use the
up/down arrow keys
to select the available reception signals.
DVB-S
For digital satellite programmes
DVB-C
For digital cable programmes
DVB-T
For digital terrestrial programmes
Analogue CT
For analogue terrestrial and cable TV programmes
FM Radio
For VHF radio transmitters.
> Use the
right/left arrow keys
to specify whether the highlighted reception signal is
available at your location and whether it should be connected to the unit (
Yes
) or (
No
).
> Confirm the settings by pressing the
green
function key.
Antenna configuration (DVB-S)
In this installation step, you can adjust the setting of your unit to the configuration of your
satellite antenna.
(If the DVB-S source has been deactivated, as described in the step
Selection of reception
signals
, the
Antenna configuration (DVB-T)
page appears directly instead of this page.)
> If you want to adopt the default antenna settings, press the
green
function key (
Accept
).
If you do this, proceed to the
Antenna configuration (DVB-T)
step.
> If the configuration of your reception unit does not correspond to the default setting,
press the
yellow
function key (
Modify
).
The antenna configuration now appears which you can adjust according to section 8.5
of the user manual for your reception unit.
Initial installation