TechniSat DIGITRADIO UP 1, Instruction Manual, Page: 23 / 292

11 System settings
All the settings referred to in this section apply equally to DAB+/FM, as well as to
Bluetooth mode.
11.1 Time and date settings
11.1.1 Manually setting the time/date
Depending on the setting for time updates (section 11.1.2), the time and date have to
be set manually.
>
Keep the Info/Menu depressed and use the << or >> buttons to select the
[Time] item.
> Press the Enter button.
> Using the << or >> buttons, select the item [Time/Date Setting] and press
Enter .
> The first time digits (hours) flash and can be changed using the
<<
or
>>
buttons.
The >> button increases the value, the << button decreases the value.
> Press Enter to confirm the setting.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press Enter after every other setting in order to go to the next setting.
> To set the date, proceed in the same way as described above.
> After all settings have been done and the Enter button pressed, [Time Saved]
appears on the display.
11.1.2 Time update
In this submenu, you can determine whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (section
11.1.1).
>
Keep the Info/Menu depressed and use the << or >> buttons to select the
[Time] item.
> Press the
Enter
button.
> Use the << or >> buttons to select the [Update Settings] item and press
Enter .
> Select the following options using the << or >> and Enter buttons:
[Update All] (update via DAB+ and FM), [Digital Radio] (update via DAB+
only), [FM] (update via FM only) , [No Update] (time/date must be entered
manually, see section 11.1.1).
23
EN
FR
IT
NL
NW
DK
PL
CZ
SK