50
51
EN
FR
IT
NL
NW
DK
PL
CZ
SK
14.2.1 WPS connection
> Select
WPS set-up
if your router has the WPS function. This establishes a direct connection to the router
without having to enter the WLAN password.
If you activate WPS on your router, please observe its instruction manual.
>
Start WPS on your router by pressing the corresponding button.
>
On the DIGITRADIO select
Press button
and follow the instructions on the display.
>
If your router supports the WPS PIN, on the DIGITRADIO select
PIN
and take note of the PIN shown on the
display. This PIN must then be entered on the router.
To find out more on the current connection select
Settings
.
Select
Manual setting
, if you know your network parameters and would like to configure them manually.
Take note of the instructions on the display.
14.2.2 Deleting network settings no longer required
> Select
Delete network profile
, to delete connections no longer required.
14.3 Time settings
>
Press the MENUbutton and select Main menu
System settings > Time settings
.
If you are in a submenu, select the
Main menu
as described in Section 5.1.
> Select
Time/date setting
to set the time and date manually.
Use the
t
or
u
buttons to select a value. Change it using the
p
or
q
buttons.
>
Confirm by pressing
OK
.
> Select
Update settings
to determine whether the time update should be automatic via
DAB
,
FM
or
Internet
or whether you would like to enter it manually.
>
To do so, select
DAB update
,
FM update
,
NET update
or
No update
.
>
Under the
Set format
option you can activate
12
or
24
hour format. Confirm your selection with the
OK
button.
> Under
Time zone
, select the current time zone where you are located.
> Under
Summertime
you determine whether summertime should currently be active.
14.4 Language
>
Press the
MENU
button and select Main menu
System settings > Language
.
If you are in a submenu, select the main menu as described in Section 5.1.
> Using
p
or
q
or
SCROLL&SELECT
, select the language and confirm the selection by pressing
OK
.
14.5 Factory setting
If you change the location of the device, e.g. when moving house, it is possible that the saved stations can no
longer be received. In this case you can reset the device to factory settings to delete all the saved stations and
then launch a new scan.
>
Press the
MENU
button and select Main menu
System settings > Factory settings
.
>
Confirm by pressing
OK
.
> Use
t
or
u
to select
Yes
and confirm the confirmation prompt by pressing
OK
.
BDA_DIGITRADIO_600_630.indd 50-51
22/06/2018 09:31