42
43
EN
FR
IT
NL
NW
DK
PL
CZ
SK
10.4 Automatic station selection
> Press
SCAN
to start the automatic scan. The station frequency runs upwards on the display.
or
> Keep
p
or
q
pressed in FM mode for approx. 2 seconds to automatically search for the next station with
a strong enough signal.
If a FM station with sufficient signal intensity is found, the scan stops and the station is played. If an RDS station is
received, the station name, and possibly radio text, appears.
Please use manual station selection for setting weaker stations.
In
Menu > Scan setting
you can set whether the scan only finds strong stations (
Strong stations only
). To
do so, press the
MENU
button and
Scan settings
.
Confirm the selection with
OK
.
10.5 Setting mono/stereo
>
Press the
MENU
button and, using
p
or
q
, set the
Audio setting
item.
> Select
YES
or
NO
to play stations with weak FM reception in mono only.
>
Confirm by pressing
OK
.
10.6 Saving FM stations
The station memory can save up to 12 stations in the FM range.
>
Select the desired station
>
Press one of the
number buttons 1-12
and keep it pressed for a few seconds. "
Saved
" appears on the
display.
>
Repeat the procedure to save additional stations.
Alternatively:
>
During playback keep the
PRESET
button on the device pressed for approx. 5 seconds until the “
Save
preset
” menu appears.
>
Now rotate
SCROLL&SELECT
to select a memory slot and press
SCROLL&SELECT
to save.
10.7 Selecting the programmed stations
>
Press the desired
number button 1-12
. If no station is saved on the selected programme slot, "
Memory
slot empty
".
Alternatively:
>
Press the
PRESET
button on the device and use
SCROLL&SELECT
to select the desired station.
If no station is saved to the selected programme slot, "
Memory slot empty
" appears.
10.8 Deleting a saved memory slot
>
Simply save a station to one of the memory slots.
11 Bluetooth
11.1 Activating the Bluetooth mode
>
Press the
MODE
button as often as required, until
Bluetooth
appears on the display.
Alternatively:
>
Press the
MENU
button and then select
Main menu > Bluetooth
.
In the status bar on the display, a flashing indicates the pairing mode.
BDA_DIGITRADIO_600_630.indd 42-43
22/06/2018 09:31
