TechniSat DIGIT MF4-K CC, User Manual

Page: 108 / 176

8.5 Service settings
You can revert to the original default settings pre-programmed
at the factory at any stage. In addition, if you find that the pro-
gramme list is outdated because of changes made by the
programme providers, you may delete the programme list
completely, and then perform a new programme scan. Please
note that
after you have deleted the list, you must then start a program-
me scan, and must then copy the desired programmes from
the Total list to the Favourites list.
> Press the Menu key to call up the Main Menu .
(Fig. 8-19)
> Now use the arrow keys up/down to mark the
menu line Settings .
> Confirm by pressing OK .
The sub-menu Settings will be displayed. (Fig. 8-20)
> Use the arrow keys up/down to mark the menu
line Service settings .
> Confirm by pressing OK .
The sub-menu Service settings will be displayed
(Fig. 8-21)
8.5.1 Activate default setting
After this function is called up, the default factory program-
ming will be implemented again, all own settings will be dele-
ted, and the installation assistant
AutoInstall will be star-
ted.
> Use the arrow keys up/down to mark the line
Activate default setting .
> Confirm by pressing OK .
The message will be displayed: “Do you really want to
activate the default setting?”.
> Use the arrow keys left/right to mark either Yes
or Abort .
> Confirm by pressing OK .
8.5.2 Delete all programmes
This function serves to delete the entire programme memory.
> Use the arrow keys up/down to mark the line
Delete all programmes .
> Confirm by pressing OK .
The message will be displayed:“Do you really want to
delete all programmes?”.
108
(Fig. 8-21)
(Fig. 8-19)
(Fig. 8-20)