5
Mute
On/Standby
Sleep timer
Remote control option
(Code+OK
at the same time)
Numeric keys
Multifunctional keys
TV/Radio
Recording
OK/
Channel list
On/Off
Arrow keys left/right
Volume–
Back
Info
Playback functions
Arrow down/Arrow up
C /Channel –
C/-
Stop/Freeze frame
/-
Menu On/Off
Video text
On/Mix/Off
Option button
Cable connection
Connecting the DVB receiver
b
Connect the antenna input of the digital receiver via a suitable coaxial cable with the cable connection
box.
Connection to a television set
d
Connect the receiver (HDMI output) and TV (HDMI input) via an HDMI cable. If your TV is suitably
equipped, it will automatically switch to the HDMI input when the digital receiver is switched on.
Or: e
Connect the receiver (component output) and TV (component input) via a component cable.
Alternatively: f
Use a SCART cable to connect the receiver (SCART socket TV) with the television set
(SCART socket). If your television set is appropriately equipped, it will automatically switch to AV, and thus
to receiver operation, when the digital receiver is switched on. Where applicable, it may be necessary to
adapt the type of signal for your television set.
Important operating instructions
The operation of the digital receiver is
simplified by the use of the “On Screen
Display”, which also serves to reduce the
number of keys required on the remote
control unit. All functions are displayed
on the screen, and can be operated
with a few keys. Related functions are
combined in a “MENU”. The function
selected is highlighted in colour. The
“Function keys” red, yellow, green and
blue are indicated by colour bars in the
bottom line. These colour bars represent
different functions in the various menus,
which will be activated by pressing the
appropriate coloured key (“Multifunction
key”) on the remote control. The “Func
-
tion keys” are only active when a brief
description is displayed in the appropri-
ate field.
Help:
Where available in the menus, pressing the blue function key will cause a help text to be dis-
played, pressing again will remove the text from the screen.
Initial installation
When switching on the unit for the first time, a start window will be displayed, with the installation as
-
sistant AutoInstall. Please follow the instructions displayed on screen. If you do not implement the initial
installation, or if it is not completed, the receiver will commence operation with a standard pre-channeld
configuration.
You can abort the initial installation at any time simply by pressing the red function key. Press the green
function key to go back to the previous step in the installation procedure. Thus any entries made in er-
ror can be quickly corrected. If you do not implement the initial installation, or if it is not completed, the
receiver will commence operation with a standard pre-channeld configuration.
