16
Please note:
The deleted sections will be irretrievably removed from the hard disk.
To delete a specific section, proceed as follows: The beginning and end of the section that is to be ex
-
tracted must be indicated by two highlighters.
> Here, highlight both the beginning and end of the portion to be deleted with one highlighter respectively.
> Now use the arrow keys up/down to set the highlighter indicating the beginning of the section to be
deleted. The section to be deleted will now be indicated in red on the progress indicator as well as in the
overview of existing highlighters.
> Now press the green function key Menu and use the arrow keys up/down to highlight the line delete sec-
tion.
> Press OK to display a selection window.
> To actually delete the section, use the arrow keys right/left to highlight the field OK and confirm by
pressing OK.
Extracting a section
This function allows you to copy a section of a recording. A new recording is generated, consisting only of
this section. The recording from which this section is copied remains in memory unchanged. To extract a
section, proceed as follows: The beginning and end of the section that is to be copied must be indicated
by two markers.
> Mark both the beginning and end of the portion to be extracted with one highlighter respectively.
> Now use the arrow keys up/down to set the highlighter indicating the beginning of the section to be
copied. The section to be copied will now be indicated in red on the progress indicator as well as in the
overview of existing highlighters.
> Now press the green function key Menu and use the arrow keys up/down to highlight the line extract
section.
> Press OK to display a selection window.
> To actually copy the section, use the arrow keys right/left to highlight the field OK and confirm by press
-
ing OK. The highlighted section will now be copied to a new recording. Depending on the size of the
section, this may take several minutes.
Splitting a recording
This function allows you where, for instance, two successive channels were recorded as a single record-
ing, to split these into two individual recordings. Each recording will be split at the point indicated by the
relevant highlighters. Recordings can be split as follows:
> Here, place a highlighter at the beginning of the portion to be extracted.
> Now use the arrow keys up/down to highlight the highlighter from which the total recording is to be split.
> Now press the green function key Menu and use the arrow keys up/down to highlight the line split re-
cording.
> Press OK to display a selection window. This will show information relating to the two recordings to be
created by the split.
> To actually split the recording, use the arrow keys left/right to highlight the field OK and confirm by
pressing OK.
Rename recordings
Your PVR extracts information from the transmitted data stream concerning the names of the broadcast
channels. If a single recording contains multiple broadcasts, all the names of the recorded broadcasts are
compiled and saved internally. To rename a recording, proceed as follows:
> Press the green function key Menu and use the arrow keys up/down to highlight the line Rename.
> Confirm by pressing OK. A list of the possible titles will be displayed.
> Use the arrow keys up/down to select the title for which you wish to change the name and confirm by
pressing OK.
> In the selection window, use the arrow keys right/left to highlight the field OK and confirm by pressing
OK.
> If you want to assign a specific name to the recording, use the arrow keys up/down to highlight the line
New.
> By pressing the OK button, a virtual keyboard is displayed, with which you can input the new name.
