22
Display control
To avoid the need to switch on the television set when navigating the MP3
playback, the latter can be controlled via the display. An MP3
fi
le is shown on
the display with its respective
fi
lename. A folder will be indicated by a display
of square brackets, e.g. [Popmusic]. The hard drive will be displayed as hard
drive and a USB device will be indicated as USB-device1, USB-device2 etc..
>
While the device is in standby mode, press the language selection
button. The device now switches itself on and automatically sets the
navigator to the music category.
>
Use the arrow keys up/down to select the source from which you wish to
play back the MP3
fi
les, and con
fi
rm by pressing OK. If no USB device
is connected to the system, only the internal hard drive of the receiver
will be available as a source.
> Now,
fi
rst use the arrow keys up/down to select the folder containing the
desired MP3
fi
le, and con
fi
rm by pressing OK.
>
Use the arrow keys up/down to select from the list the MP3
fi
le you wish
to play
fi
rst, and con
fi
rm by pressing OK. The
fi
le selected will now be
played. Thereafter the other
fi
les located on the same source medium
will be played automatically.
Playback/reproduction of pictures
You can use your receiver to display created images, as well as
fi
les, which are
saved in JPG format on the hard disk or on a device connected via the USB
socket. The USB device should be formatted using the
fi
le system FAT 32.
>
During normal operation, press the green function key to open the PVR
navigator.
>
Press the red function key Category to open an additional window.
>
Use the arrow keys up/down to highlight the line Pictures and con
fi
rm by
pressing OK.
>
Use the arrow keys up/down to select the source from which you wish
to view the picture
fi
les, and con
fi
rm by pressing OK. A list showing
the picture
fi
les available on the hard drive and the USB device will be
displayed.
>
Use the arrow keys up/down as applicable to initially highlight the folder,
which contains the desired image
fi
le, and con
fi
rm by pressing OK.
>
Use the arrow keys up/down to select from the list of JPG
fi
les, which
you which to view and con
fi
rm with OK. The picture selected will now be
displayed in large format.