15
ENEN
>
Now highlight the desired channel with the help of the numeric keys
(channel input) and/or with the help of the arrow keys. Use the arrow
keys up/down to move the highlighter around the list one line at a time
and the arrow keys left/right to move the highlighter forwards or back-
wards one page at a time.
>
Press the OK key to accept a channel into the timer memory.
Date
>
Use the arrow keys to highlight the column Date.
>
Use the numeric keys to enter the date (in 4-digit format) on which the
timer event is to take place.
Start
>
Use the arrow keys to highlight the column Start.
>
In this line, use the numeric keys to enter the starting time for the timer.
Stop
>
Repeat the steps as for “Start” in order to enter the stopping, or ending
time (except in the case of channel change timers).
Repeat
>
Use the arrow keys to highlight the column Rep.
>
Press the OK key.
A selection window will be displayed, presenting various repeat options:
1x Timer once
T Daily repeat
1 W Repeat once per week
1-5 Repeat only on weekdays
6-7 Repeat only on weekends
>
Use the arrow keys up/down to select the desired function.
>
Press OK to accept the setting.
Accepting data into memory
>
When you have completed the programming, press the green function
key Accept, to transfer the data to memory. After the data have been
saved into memory, the timer overview appears.
Timer overview
The timer overview function gives you an overview of all timer events already
channeld.