TechniSat 19889, Instruction Manual

Page: 52 / 130

9.1 Pairing a device
> Select Bluetooth mode on the DIGITRADIO UP1. The display shows [Bluetooth
Visible] .
> Open the Bluetooth settings on the smartphone/tablet that you wish to pair
with the DIGITRADIO UP1.
> Launch the search for available Bluetooth devices.
> From the list of detected Bluetooth devices, select the DIGITRADIO UP 1 item.
> Once successfully paired, [Bluetooth Connected] appears on the display.
Please refer to the instruction manual for your smartphone/tablet as to how
to use the Bluetooth function on your smartphone/tablet.
9.2 Bluetooth playback
Once you have successfully paired your smartphone/tablet with the DIGITRADIO
UP1, you can start playing audio. Open a music app on your smartphone/tablet
and start playing music. Depending on the smartphone/tablet, the sound will either
be played directly via the DIGITRADIO UP1, or you will first of all have to select the
DIGITRADIO UP1 as the playback device. Please refer to the instruction manual for
your smartphone/tablet as to how to select playback devices via Bluetooth on your
smartphone/tablet.
>
To pause playback, press the Enter button, or pause via the music app on your
smartphone/tablet. Press the button again to continue playback.
> To skip to the next track, press the >> button, or select the next track in the
music app on your smartphone/tablet.
> If you would like to listen to the track currently being played from the start,
press the
<<
button once. To skip to the previous track, press the
<<
button
twice. Alternatively, use the music app on your smartphone/tablet.
> The volume can be adjusted using the Vol+/- buttons, or with the volume
control on your smartphone/tablet.
Control of the smartphone/tablet via the DIGITRADIO UP1 is only possible with
supported devices.
Depending on the smartphone/tablet, ring tones or system tones can also be
transferred.
20