TechniSat 19889, Instruction Manual

Page: 46 / 130

5.5 Retrieving displays
> Press the Info/Menu button repeatedly to scroll through the information
available. You have the choice of viewing the following information:
In DAB+ mode (the selected function is identified with an “ * ”):
[Running text] (continuous text with additional information provided
by broadcasters etc.), [Signal intensity] , [Channel type] , [Ensemble] ,
[Frequency] , [Signal quality] , [Bit rate and Codec] , [Time] and [Date] .
In FM mode (the selected function is identified with an “*”):
[Radio text] (if transmitted), [Channel type] (PTY), [Ps] (Programme Service
Name or Station Name or Frequency), [Audio Information], [Time] and [Date] .
6 Menu operation
All the DIGITRADIO UP1 functions and settings are accessed via the menu. The menu
navigation takes place using the Info/Menu , << , >> and Enter buttons.
The menu is divided into submenus and, depending on the mode (DAB+ or FM),
contains different menu items or functions which can be enabled. To open the menu,
keep the Info/Menu button depressed. To change to submenus, first of all press the
<< or >> buttons to display a submenu, then press the Enter button to retrieve the
submenu. An asterisk ( * ) highlights the current selection.
Close menu: press the Info/Menu button repeatedly (depending on which
submenu you are in), or wait until the current radio channel is displayed again.
Settings are not saved until the Enter button is pressed. If the Info/Menu is
pressed instead, the settings are not confirmed and saved (the Info/Menu
button in this case acts as a “Back” button).
The functions and buttons to be pressed are shown in bold in this instruction
manual. Displays in
[square brackets]
.
Some texts (e.g. menu items, station information) may be too long to show on
the display. Shortly thereafter, these will be shown as running text.
14