![background image](http://html1.mh-extra.com/html/technisat/0000-9519/0000-9519_manual_1069658016.webp)
6.9 Thermostat set point
The following set points of the heating thermostat HT2 can be altered.
7.0 Troubleshooting
Replace batteries
Adjust temperature of the boiler water. Remove the HT2,
move the valve back and forth per hand or with a tool
Unmount HT2. Move the valve stem several times by hand,
it may be that adaption is impossible because your valve is
calcified or the seat no longer performs it function.
Remove batteries. Out in the pressure piece. Insert the
batteries. The endless thread is rotating now and fixes the
pressure piece again.
Z-wave controller out of range
Check if the valve is jammed
Check if the HT2 is correctly mounted
Check if the HT2 is correctly mounted
Technisat is a registered trademark of:
TechniSat Digital GmbH TechniPark
Julius-Saxler-Str. 3
D-54550 Daun
Germany