6
Configuration
1
Reading the system
By the menu item (
System | Read out system
) or by clicking on the respective symbol in the symbol
bar you can build up a connection to BS5 Light. The following dialog appears to establish a connection:
The used computer COM port will display.
After successful connection the configuration window appears.
2
Basic settings
Double click on the BS5 Light units in the Navigation tree opens the Basic Settings window.
All the configurable parameters of a module, such as the input and output frequencies, can be set using
the
Basic Settings
window.
Non-configurable parameters (such as SNR, BER, code rate), which represent continually varying status
information regarding the head-end, are read at intervals of about 3 seconds and updated in the
dialogue window
The display always refers to one of the eight channels in the head-end. First select the channel 1 to 8
for which you wish to change the settings.
