62
12.5 Language
You can alter the system language under
System settings > Language
. Confirm the
selection by pressing the
Scroll&Select/Snooze knob.
12.6 Factory settings
Select
System Settings > Factory settings
to reset the TECHNIRADIO 5 IR to its
delivery status. Calling up the factory settings resets all changes and settings you
have made!
12.7 Info
Under
System Settings > SW Version
you will see the currently installed software
version.
12.8 Software update
The TECHNIRADIO 5 IR's software can be updated via the Internet.
> Select
Auto Update
to switch periodic checks for new software versions
On
or
Off
.
> Select
Check Now
to start checking for new software.
If new software is being installed, the device should not be switched off or
disconnected from the mains. Doing so can damage the unit.
If a software update has been located, follow the instructions on the display.
In order to find and upload software updates, the device must be connected
to the Internet. Do not switch the device off during the update process and do
not disconnect it from the mains power supply!
13 Cleaning the radio
WARNING!
To prevent the risk of electric shock, you must not clean the device using a wet
cloth or under running water. Remove the plug from the mains socket before
cleaning.
You must not use scouring pads, scouring powder and solvents such as
alcohol or petrol.
>
Clean the housing using a soft, damp cloth.
Summary of Contents for 0000/3929
