46
4.4 General device functions
4.4.1 Switching on the device
>
Switch on the TECHNIRADIO 5 IR by pressing the
Power
button (1).
After switching on the device for the first time, you must first set the
[Language]
. To do this, select one of the available languages by turning the
Scroll&Select/Snooze knob
, then press the
Scroll&Select/Snooze knob
to
confirm the selection. You can then launch the initial set-up wizard. Do this
by selecting
Yes using the Scroll&Select knob
. Here you can set the date
and time either via DAB/FM, Internet or no update (manual). An attempt is
then made to establish a connection to a WLAN network. To do so, select the
corresponding WiFi network and, if required, enter the WiFi password.
4.4.2 Switching off the device
>
By briefly pressing the
Power
button you can switch the device to standby
mode. The date and time are shown on the display. The display brightness in
standby mode can be adjusted by following the instructions in Section 12.4.
4.4.3 Source selection
>
Press the
MODE
button (2) to switch between
DAB+
(Digital Radio),
FM
,
Internet radio/music playback
and
Aux In
sources. Press the button
repeatedly to do so.
Alternatively:
>
Hold down the
Menu/Info
button until the main menu opens.
>
Use the
Scroll&Select/Snooze knob
to select the
[Mode Selection]
item,
then press the
Scroll&Select knob.
>
Use the
Scroll&Select knob
to select the source you want, then confirm your
selection by pressing the
Scroll&Select knob
.
4.4.4 Adjusting the volume
>
Adjust the volume using the
Volume knob
. Turning to the right increases the
volume; turning to the left reduces it.
The set volume is shown on the display by way of a bar chart.
Summary of Contents for 0000/3929
