TechniSat 0000/3913, Operating Manual

Page: 75 / 180

75
DE
EN
FR
NL
10.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
>
Hold down the Previous Track or Next Track buttons to quickly skip
forwards or backwards within a track for as long as the button is held down.
10.6 Repeat function
You can select whether a track, the entire folder/album (only for mp3 CDs) or all of
the tracks on the CD are to be repeated.
>
Press the Repeat button multiple times.
The selected mode appears on the display ( Repeat Track 1x , Repeat Album ,
Repeat All ).
> To switch the function off again, press the Repeat track button as often as
required until the
[Repeat off]
appears.
10.7 Random playback
With the random generator, the CD tracks can be played back in random order.
>
If you press the SHUFFLE button while playing, Random appears on the
display.
> To switch the function off again, press the SHUFFLE button again.
10.8 Programming function
With the programming function, you can play tracks on a music CD or an MP3 CD in
an order that you determine yourself.
You can only perform programming if there is a disc inserted and the device is
in Stop Mode .
> Press the FAV button on the remote control.
> The Folder Number and the Track Number flash on the display. [P01] appears
to the right of this. P01 is the first programming slot. Any tracks you want can
then be set up in sequence in the programming slots.
> Use the F+ and F- buttons to select the folder where the track is located that
you want to put in Programme Location 1.
> Use the Previous Track or Next Track to select the first track to be
programmed.
> Press the OK button to accept the track.
> The programming slot 2 ( P02 ) is then active. Proceed as described above to
save a track to programming slot 2. Do this to save the tracks you want to all
the programming slots.
BDA_DIGITRADIO_3_V11.indd 75 BDA_DIGITRADIO_3_V11.indd 75 10/11/2020 09:45 10/11/2020 09:45