Display
Reason
Solutions
If the washing machine cannot operate normally, a alarm code appears on the
display. Please carry out the following checks.
Open the water tap, to check if the inlet hose is
squashed or kinked, check the filter in the inlet valve
is blocked or not; check if the water pressure is too low.
Check if the drain pump is blocked (see page 10).
Check if the voltage is too high if it is a need to add
the constant voltage device.
Inlet water
overtime
Overtime of
the drainage
The door has
not been closed
Voltage is
too high
Check if the door of the washing machine is closed
check if the clothes are pinned by the door.
Technical specifications
Try again. Please contact your local service center
if the problem persists.
Others
1018mm
565mm
855mm
595mm
Malfunction display and solutions
11
Power supply voltage
220-240V/ 50Hz
Water pressure
Net weight
75Kg
7.5Kg
1200
Drain method
Upper drain
Spin method
Washing capacity
Maxinum spin speed rpm
Centrifugal
Wash power
Spin power
Heat power
Total power absorbed
2000W
200W
2200W
460W
MIN 0.05-MAX 800Kpa
