background image

Useful advice for the user

Usage

Connect with cold water only.

This washing machine is suitable for washing-the fabric that can be washed in the water
with the detergent.

Plug the power  

.

turn on the tap.

Put detergent in the compartments as indicated in the programme guide in this instruction
 manual and push  start/pause  button.

First wash

1

3

4

slect the self-clean programme.

The choice of the detergent

Main wash detergent Special additive Pre-wash detergent

The recommended main wash detergent and pre-wash detergent
 for this front loading washing machine is low sups detergent suitable
 for the front loading washing machine.It is forbidden to use high suds
 detergent unsuitable for the front loading washing machine,in case of 
 any damage to the washing machine.
The dosage of the detergent lies on: 1. amount of laundry 
2.the degree of soiling 3.water hardness 4. The washing ability of the
detergent
Please check the instruction of the detergent before the wash. 
You will get a better result by using the detergent properly.

Pre-wash detergent-if there is any clothing that needs the pre-wash, please add the pre-wash detergent
 in the pre-wash compartment for the better effects during the following wash procedure. (At this time in
 the main wash detergent compartment, the liquid detergent shall not be used, or the deserved effects
 cannot be reached.)

I

II

3

The cleaning of the detergent dispenser drawer

 Clean

 Press

1

 

Pull out at the same time

2

The detergent will  deposit in the
 compartment after a  long usage, 
so the detergent drawer needs to 
be cleaned frequently.

Press the detergent box limit 1,
 and pull out the drawer of 
 the detergent box and clean
 the detergent compartment.

    

Notice

some fabric will fade when it is washed

please do not wash the faded fabric with other clothing.

    

Please wash the white fabric separately; 

Bleach - if the bleach is needed, it shall be used according to the bleach instructions in the
 washing procedure.

Special rinse additive is the softener. Please dilute the softener with water before
use if it is dense.

Your machine solely designed for the domestic use.

Please select the detergent and clothing care detergent that is suitable for the front loading 
washing machine.

Before the first wash, you need to finish the  high temperature self-clean  cycle without
any laundry. Please follow the steps below:

The new hose-sets supplied with the appliance are to be used and that old hose-sets 
should not be reused.

Summary of Contents for T75E1200FL


















Reviews: