Technika MP-111, User Manual

Page: 6 / 51

6
Getting Started
Before using the player you should charge the battery
• Make sure the player is switched off.
• Connect the supplied USB cable to the player
• Plug the cable into a free USB port on the PC.
• The computer system detects “New hardware” and installs the driver
automatically. Wait for the system to finish the installation.
• If connection is successful you will see the player screen on the right.
• When the player is connected to the PC, two drives will be created in
“My Computer” . Refer to Page 13 for further information
• You should leave the player battery to charge for at least six hours.
While the player is charging you can upload files directly to the player
and synchronise your music via Windows Media Player 10 or 11.
The player controls are disabled when it is connected to the PC!!
RESETTING THE PLAYER
If for any reason the player freezes and the screen blanks out it will be
necessary to perform this reset procedure.
• Disconnect the player from the PC
(Refer to Page 15).
• Locate the RESET hole on the player
• Place a small piece of wire (the end of a paperclip) into the hole and
press gently.
• This will reset the player which will now work normally.
OK to disconnect!