
6
REMOVING THE PACKING FROM THE CD PLAYER
Before connecting power to your audio system, the protective
packing should be removed from the CD compartment.
To remove the protective packing:
Open the CD compartment by pressing the CD Door
•
OPEN/CLOSE
button.
The lid will open.
Remove the cardboard protective packing from the CD
•
compartment.
Close the CD lid.
•
DAB/FM RADIO AERIAL
Before using your radio for DAB or FM reception, unwrap
and fully extend the aerial wire. You may need to adjust the
position of the aerial wire for maximum signal strength.
CONNECTING POWER
Check that the mains voltage marked on the rating plate
•
on the back of the unit is the same as the voltage in your
area.
Remove any protective packing from the mains plug
•
pins.
Plug the mains plug into the wall socket and switch the
•
mains power on.
ADJUSTING THE VOLUME
Automatic clock setting:
The clock time will set automatically when a DAB station is
first tuned.
GETTING STARTED
STANDBY CONTROL
To turn the system on:
Press the
•
STANDBY
button on the front panel or
remote control.
The display will light and the system will set to play the last
function used. If this was radio, the last station played will be
selected.
To turn the system off:
Press the
•
STANDBY
button.
The system and display light will switch off. The clock will
continue to run whilst mains power is connected.
STANDBY CONTROL
SETTING THE CLOCK
VOLUME CONTROL
To increase the volume:
Turn the
•
VOL/SKIP/SCROLL
knob clockwise or press the
button on the remote control.
To decrease the volume:
Turn the
•
VOL/SKIP/SCROLL
knob anti-clockwise or press
the
VOLUME -
button on the remote control.
MUTE
You can use the Mute function to instantly set the volume
to minimum.
To mute the volume:
Press the
•
MUTE
button on the remote control to set
mute at any time.
Press the
•
MUTE
button again to restore the volume to its
previous setting.
Summary of Contents for MC-122IDAB
Page 1: ...MC 122IDAB Owner s Handbook Mini DAB audio systemwith iPod dock ...
Page 2: ......
Page 19: ......