Technika MC-122IDAB, Owner'S Handbook Manual, Page: 11 / 20

9
MANUAL TUNE
Manual tuning may be used to tune the band by frequency
or multiplex. A station multiplex may then be selected and
displayed with a signal strength bargraph to assist with
aligning the aerial for best signal.
To tune manually:
Select the DAB band. •
Press the •
MENU
button to open the scanning and tuning
menu.
Press the
• SCROLL
M
or
N
button repeatedly until
<Manual Tune> is displayed.
Press the
•
SELECT/REPEAT
button to select this option.
The display will switch to show multiplex number and
frequency.
Press the • SCROLL
M
or
N
button repeatedly to step
through the DAB channels.
To select a multiplex, press the
• SELECT/REPEAT button.
The selected multiplex number will be displayed with (if
present) the multiplex name and signal strength.
Press the • SELECT/REPEAT button to play a station from
this multiplex.
DAB SCANNING AND MANUAL TUNING MENU
DAB SCANNING
When first used, your audio system scanned the DAB band
for available stations. The station services found were then
stored in your system’s memory.
You can re-scan the band at any time if you move to a different
area or just to refresh the stored list of available stations.
Two types of scan are available, a Quick Scan that scans UK
DAB bands for available services and a Full Scan, that scans
all bands.
To start a scan:
Select the DAB band. •
Press the •
MENU
button to open the scanning and tuning
menu.
Press the
• SCROLL
M
or
N
button repeatedly to display
the scan mode you want.
Presss the
•
SELECT/REPEAT
button to start the scan.
The unit will now display the legend ‘SCANNING’ and a
bargraph to show scan progress.
The number of services found during the scan will be shown at
the right side of the display.