Technika MC-122IDAB, Owner'S Handbook Manual, Page: 5 / 20

3
PREPARATION FOR USE
PLACEMENT
Place the unit on a sturdy table or shelf where it cannot get
knocked over and where there is a clear line of sight to the
remote handset.
Make sure that there is a clearance of 10cm (4 inches) around
the unit for ventilation.
LOUDSPEAKERS
Placing the speakers
Unwrap the speaker wires from the ties securing them to the
back of each speaker.
Place a speaker on either side of the main unit, preferably
at the same height, and with at least 150mm between each
speaker and the main unit.
Connecting the speakers
Locate the block of 4 speaker terminals on the back of 1.
the unit.
Press down the red spring latch on the right channel
2.
s terminal as shown in the drawing.
Feed the plain red wire from the right speaker into the 3.
terminal and release the latch to retain the wire.
Connect the left speaker wires to the other two terminals 5.
in the same way, observing polarity.
Check that the bare ends of the wires are not exposed 6.
and cannot touch together.
Repeat these steps to connect the striped wire to the 4.
black terminal.