Technics SX-KN2400, Operating Instructions Manual

Page: 197 / 199

Part I Sounds and effects
45
QQTG0692
S
o
u
n
d
s
an
d ef
fe
ct
s
Controller
Use the controllers (left next to the keyboard) to change the nuance of the sound while you are playing.
PITCH BEND
The pitch of the instrument can be continuously
changed with the
PITCH BEND wheel at the left
end of the keyboard. Using this control, you can
produce the effect of bending the strings on a
guitar.
While pressing a key on the keyboard, move the
wheel up and down to control the pitch.
• When you release your hand from the wheel, it
returns automatically to the center position
and the pitch bend effect is turned off.
• The pitch bend effect does not function for the
AUTO PLAY CHORD accompaniment pattern
or during a normal performance for the sounds
of the
LEFT part.
• The amount of pitch bend can be set. (Refer to
page 149.)
MODULATION (KN2600)
The MODULATION wheel is used to apply a
vibrato effect, for example, to the sound.
While pressing a key on the keyboard, move the
wheel up to add the effect.
• When this effect is not needed, set the MOD-
ULATION wheel to the MIN position.
• This effect differs depending on the selected
sound.
• The vibrato effect does not function for the
AUTO PLAY CHORD accompaniment pattern
or during a normal performance for the sounds
of the
LEFT part.
PITCH BEND
UP
DOWN
MODULATION
MAX
MIN
06_Part I.fm 45 ページ ２００３年２月５日 水曜日 午後２時３８分