Part IV
Sequencer
99
QQTG0692
Se
qu
en
ce
r
MEASURE ERASE
Erase the recorded contents of specific mea-
sures. You can also specify which type of data is
to be erased.
• Note that only the contents of the measures
are erased, not the measures themselves; the
length of the performance remains the same.
1.
Use the TRACK
∧
and
∨
buttons to specify
the track number.
• This function does not work for the RHYTHM
part or CHORD part in which a repeat com-
mand has been stored.
• If ALL is selected, data is erased from the
specified measures of all the tracks at one
time.
2.
Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number).
3.
Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number).
4.
Use the ERASE DATA
∧
and
∨
buttons to
specify the type of data to be erased.
ALL:
All data is erased.
NOTE:
Only note data is erased.
CONTROL:
Only control data (volume, effect and other
panel settings as well as selection changes)
is erased.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
MEASURE DELETE
Delete specified measures from a track.
• The length of the performance accordingly
decreases by the number of deleted mea-
sures.
1.
Use the TRACK
∧
and
∨
buttons to select the
track from which measures are to be deleted.
• This function does not work for the CHORD or
RHYTHM track in which the repeat function
has been stored.
• If ALL is selected, the specified measures are
deleted from all the tracks at one time.
2.
Use the FIRST MEAS
∧
and
∨
buttons, to
specify the first measure to delete.
3.
Use the LAST MEAS
∧
and
∨
buttons to
specify the last measure to delete.
4.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
09_Part IV.fm 99 ページ ２００３年２月５日 水曜日 午後１時３４分
