14
Network settings
You can stream music from an iOS device
(iPhone/iPad/iPod), an Android™ device or a PC
(Mac/Windows) to this unit by using the AirPlay or DLNA
feature. (
>
15, 17)
To use these features, this unit must join the same network
as the AirPlay compatible device or the DLNA compatible
device.
Normally, just connecting a LAN cable will complete the
setup.
A
: LAN cable (not supplied)
1
Disconnect the AC mains lead.
2
Connect this unit to a broadband router, etc.
using a LAN cable.
3
Connect the AC mains lead to this unit, and
press the unit on/off button to the [
]
position. (
>
12)
You can change this unit’s name on the network (Friendly
Name), and use specific IP address, subnet mask, default
gateway, primary DNS, etc.
≥
Do not play back music while changing these settings.
1
Press [SETUP].
2
Press [
3
,
4
] repeatedly to select “Network” and then
press [OK].
3
Select and input the details.
4
Press [OK] to apply the settings.
5
Press [RETURN] repeatedly to exit the settings.
6
Press [
Í
] to turn the unit to standby mode.
≥
Wait until “Please Wait” disappears.
7
Perform “Wired LAN connection”. (
>
left)
≥
Use category 7 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥
The LAN port and the system terminal are identical in shape. Be
careful not to mistakenly connect the LAN cable connected to
another device, such as a broadband router, to the system
terminal.
≥
Inserting any cable other than a LAN cable in the LAN port can
damage the unit.
≥
If you change the network settings immediately after turning on
this unit, it may take some time until the changes are applied.
Wired LAN connection
This unit
(rear)
PC, etc.
Broadband router, etc.
To make network-related
settings
(14)
SU-R1-SQT0463_EBEG_mst.book 14 ページ ２０１４年１２月３日 水曜日 午前８時５７分
