Ethernet
Cable (1)
Technicolor Modem*
and power supply
Back of Technicolor Modem
STEP 2
Using the Ethernet cable provided, connect your laptop
(or the Internet / WAN port of your router if you would
like a network setup) to the modem’s ETHERNET port.
Back of Modem
Please wait for the modem to boot-up. The Technicolor modem must have solid
POWER, DS, US and ONLINE green or blue lights displayed. The LINK light should be
either solid or flashing. A flashing LINK light indicates data transferring. If the lights
do not behave as described, repeat steps 1 and 2.
Technicolor Modem Lights
LIGHTS
READ
Power
Solid
DS
Solid
US
Solid
Online
Solid
LINK
Solid or Flashing
STEP 3
Front of Technicolor Modem
Thank You for choosing Acanac
In order to ensure the smooth setup of your Acanac High Speed Cable
Internet service, please follow the easy steps laid out in this guide.
CONGRATULATIONS! YOUR
SETUP IS NOW COMPLETE.
The setup kit for your High Speed Cable
service should contain the following items:
Before beginning the setup process, please ensure
that all of your equipment is turned off.
* Please note that the modem shown is for the purposes of illustrating the
setup process and may differ from your device.
If you require a longer length of coaxial cable, this
can be purchased at most home electronic stores.
STEP 1
Connect the coaxial cable emerging from your cable outlet
to the CABLE port located on the back of the modem.
Cable Outlet
Coaxial Cable
Ethernet Port
Ethernet Cable
You may now turn all your devices back on.
