13
3
The Wi-Fi extender web interface appears. By default, you are logged in as
guest. This means that some items are hidden. To view all items, click
Sign In
and
enter
admin
as user name and the
ACCESS KEY
printed on the label of your
Wi-Fi extender as password.
Note:
If this is the first time that you sign in, the OWA3111 may offer you to
change your password.
4
The Wi-Fi extender web interface appears with all settings available.
Configuring Easy Mesh
To use EasyMesh you must first enable it on your OWA3111. To enable EasyMesh:
1
Browse to the Wi-Fi extender web user interface and login as the user
admin
(for
more information, see
“Accessing the OWA3111 web interface” on page 11
).
2
To open the EasyMesh page, click the
EasyMesh
card header.
3
On the EasyMesh page, you can see whether EasyMesh is enabled on your
Wi-Fi extender or not. If the switch is set to:
then the EasyMesh agent is enabled. Clicking the switch will disable
EasyMesh on your Wi-Fi extender.
then the EasyMesh agent is disabled. Clicking the switch will enable your
broadband interface.
5.8. How to repair an unresponsive Wi‑Fi extender
If at some point your Wi-Fi extender becomes unresponsive you can:
•
Force it to restart
: After restarting the OWA3111 will return to normal operation
with its last known working condition and configuration.
•
Reset it to factory defaults
: The OWA3111 restarts with the factory default
configuration. None of the Wi-Fi and EasyMesh settings, nor other configuration
changes you made to the OWA3111 are preserved.
Proceed as follows:
1
Make sure that your Wi-Fi extender is turned on.
2
Use a pen or an unfolded paperclip to push the recessed
Reset
button on your
Wi-Fi extender:
shortly (less than 5 seconds)
and then release it to force it to restart.
for at least 10 seconds
and then release it to rest it to factory defaults.
Reset
3
Your Wi-Fi extender restarts..
