Technicolor MediaAccess TC8717T Setup And User Manual Download Page 51

Page: 51 / 84

5 SHARING CONTENT

DMS-CTC-20140127-0004 v1.0

5.1 The network file server

Introduction

The Network Server allows you to share the content on your USB storage device(s) with other devices that are connected to
your local network (mostly computers).

These devices have

read and write access

to this USB device(s).

Accessing the shared content on Windows

Proceed as follows:

On the Windows

Start

menu, click

Computer

An Explorer window appears. In the panel, click

Network

If Explorer prompts you that network discovery and/or file sharing are turned off, click on the message and turn it on.

Explorer displays a list of detected devices.

Double-click

BRCM-LVG

(this is the Gateway’s file server).

Summary of Contents for MediaAccess TC8717T





















































































Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands

Technicolor MediaAccess TC8717T, Setup And User Manual

Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands