Technicolor MediaAccess TC8717T Setup And User Manual Download Page 40

Page: 40 / 84

3 ADMIN TOOL

DMS-CTC-20140127-0004 v1.0

3.2 How to change the default Admin Tool password

We recommend changing the default password of the Gateway.

Procedure

Browse to the Admin Tool (http://192.168.0.1).
For more information, see

“Accessing the Admin Tool” on page 25

In the upper-right corner, click

Change Password

The

Change Password

page appears.

In the

Current Password

box, type your current password.

In the

New Password

and

Re-enter New Password

box, type your new password.

Click

Save

The Gateway prompts you to login with your new password.

The default user name is

admin

and the default password is

password

The default password is

password

Your new password must be at least 8 characters long. It may include letters or numbers or a combination of both
(no symbols). For better security, try using at least one number and a mix of upper and lower case letters.

Summary of Contents for MediaAccess TC8717T





















































































Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands

Technicolor MediaAccess TC8717T, Setup And User Manual

Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands