CBR CGA4131COM- User Guide
49 of 61
4. Right-click
Technicolor CGA4131COM
and click
View device web page
.
5. The Admin Tool appears.
How to use UPnP to access your Gateway on Windows XP
If your computer runs Windows XP:
1. Go to
My Network Places
.
2. The
My Network Places
window appears.
3. Double-click
Technicolor CGA4131COM
.
4. The Admin Tool appears.
6.1.2 Port forwarding
Introduction
Port forwarding allows you to forward incoming Internet traffic arriving on a specific port to an internal IP address.
For example, if you are running a web server and the Gateway receives a request on port 80, this request should
be forwarded to your web server.
Use a reserved IP address
The target device of the port forwarding rules will be specified by an IP address. Make sure that your device uses
a fixed IP address. If you do not do this, the device might get a new IP address after some time and the port
forwarding rule will no longer be applied to the device. For more information, see
6.2 Assigning a reserved IP to a
device.
Procedure
Proceed as follows:
1. Go to the Admin Tool (http://10.1.10.1), using a computer or device that is currently connected to your
Gateway (either wired or wirelessly). For more information, see
“Accessing the Admin Tool”
.
2. On the left menu, click
Advanced
.
3. The
Port Forwarding
page appears.
In the
Enable Port Forwarding
list, click
Enabled
. In the
Port Forwarding
table, click
+ADD SERVICE
.
4. The
Add Service
page appears.
