P-2
Warning:
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and
have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts
appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the
event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory bo x and
packing.
Attention!
This unit is perfect condition before delivery, please check all accessories when unpacking the
un it, user should followed this user manual to operate this unit, and make sure that you are clear
on all laser safety information and unit operation before power it on. Any wrong operation will
make this unit out of warranty.
Carefully move after receiving it, checking whether there is any damage from shipping, and all
the accessories in it.
Safety Instructions:
To protect the environment, please try to recycle the packing material as much as possible.
The fixture is for indoor use only, IP20, use only on dry locations, keep this device away from rain and moisture, excessive heat,
humidity and dust. Do not allow contact with water or any other fluids, or metallic objects.
Don’t show this product away just as general trash, please deal with the product follow the abandon electronic product regulation
in your country.
Locate the fixture in a well ventilate spot, away from any flammable materials and/or liquids, the fixture must be fixed at l east
20cm from surrounding walls.
● To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatures when bringing it into a warm
room after transport.
● Condense sometimes prevents the unit from working at full performance or may even cause damages.
● Don’t install it on flammable object.
● Don’t use it when maximum ambient temperature is higher than 40 degree.
● Unplug the unit when it is not used for a longer time or before replacing the bulb.
● Don’t open the top cover to avoid unit damage.
● Please use the original packing when the device is to be transported.
● Never expose the lens to direct sunlight, even for a short period, this may damage the light effect or even cause fire!
Laser Safety
According to EN60825-1:2007, this product belongs to CLASS 3B, direct eye contact may cause injury.
● This product is for laser show only. The class 3B laser light should be operated by professional operator only.
● This is so-called show laser, emitting radiation with a wavelength spectrum between 400 and 700nm and producing lighting
effects for shows.
● International laser safety regulations require that the vertical height from installment to ground is more than 3 meters, horizontal
distance is 2.5meters from audience.
● Never direct the laser beam to people or animals and never leave this device running unattended.
● The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the l egal
requirements at the location/country of use.
Warning: Avoid direct eye contact with laser beams during operations, especially when the laser beams stay still, or injury
to eyes may occur.
Laser safety protection
Caution: The laser security measures are designed according to the specific terms of the relevant international laser safety
standards and has the following laser safety protection means.
Laser key switch: Laser is available only when the key is turned on.
Laser Emergency Switch: Remote connecting switch, it will cut off ther laser light path emergently once the device in potential
hazard.
Laser safety label: the labels of according with European standard are sticked on the device only.
LGLASER48
