1000BASE-T1 MediaConverter EMC
User Manual
7
Pinning:
Pin
Function
1
Minus
2
Plus
Table 2
—
1: Pinning MATEnet Connector
2.1.2
Optical Interface on the backside
The optical interface is a serial terminal connection. For using this a special USB
Adapter is required (Please ask for this adapter).
•
Plug in the optical cable on both sides crossover. RX
–
TX
•
Open a Terminal program (e.g. TeraTerm) at your PC and open the USB Device
as serial connection.
•
Speed settings: 14.400 kbit/s and 8N1.
•
Status information is displayed. The error counter can be reset by pressing
“Space” key
Figure 2
—
2: MATEnet Connector
