1000BASE-T1 MediaConverter EMC
User Manual
10
3
CONFIGURATION OF THE DEVICE
The 1000BASE-T1 MediaConverter_EMC is configured by two
DIP-Switches
on the
front of the device.
DIP-Switch
Status
Description
1
ON (up)
OFF (down)
1000BASE-T1 Port is set to Master
1000BASE-T1 Port is set to Slave
2-4
ON (up)
OFF (down)
2 OR 3 OR 4: Test Modes for PHYs
All OFF: Normal Operation Mode
Table 3
—
1: Configuration of DIP-Switches
Note
: In a 1000BASE-T1 Link one device must be set as Master, the other has to be set
as Slave.
