Technibel TWN Series, Installation Instruction

Page: 4 / 16

GB
4
2.2.1 - UNITS WITH CASING (THREE POSSIBILITIES)
• Vertical, wall-mounted installation, air intake underneath ( Cv ).
• Vertical, floor-mounted installation, air intake at front ( CH ).
• Horizontal installation, air intake at front ( CH ).
TWN-CH models may be installed horizontally or vertically .
2.2.2 - UNITS WITHOUT CASING (TWO POSSIBILITIES)
• Vertical installation, air intake underneath ( NC ).
• Horizontal installation, air intake at front ( NC ).
TWN-NC models may be installed horizontally or vertically .
(
*
)
1
0
0
> 20 > 20
Cv and CH models (vertical)
2
150 150
1
0
0
NC models (vertical)
150 150
NC models (horizontal)
20 20
CH models (horizontal)
(*) Cv models only.
NOTE:
For false ceiling applications, the installation's maximum
heights must be respected in order to avoid problems
related to stratification.
Such problems are best controlled by placing the air
intake at floor level.
Heights are calculated for High Speed operation.
2.3 - CASING INSTALLATION
• For models with casing, remove the trim by unscrewing
the 4 mounting screws located under the two access
doors.
• For units having their air intake at the front, also remove
the 2 screws located at the air intake.
• CAUTION: For appliances with body panels (casing)
installed without the built-in control panel, access to
the inside of the unit must be prevented by screwing
down the access doors.
H
100 mm mini
(NC)
(CH)
TWN - CH
TWN - NC
H (m)
02 - 03 2.50
04 2.70
05 3.00
06 - 08 - 11 3.20
Screw
Access
door
Screw