GB
3
3 - COMPOsITION
• The kit includes:
- A control box to be installed in the comfort zone (see
paragraph 5.1).
- An outside temperature sensor unit placed on the facade
of the building (see paragraph 5.2).
4 - OPeRATING PRINCIPle
• The kit is designed allow complete installation control from the parameterable control unit.
• The orders given by the control unit are transmitted (via a two-wire communication line (BUS)) to installation elements.
• The heat pump and its electric support heater are controlled according to a setpoint resulting from the water temperature
calculated according to a water law (according to the outside temperature). Priority is given to thermodynamic heating.
• See operating details in the technical control file supplied with this kit.
•
The system control kit K60D070Z
is appropriate for standard applications using heat pump with
electric support heater
:
•
Control unit
:
- Plastic wall-mounted control unit.
- Dimensions: height
= 128 mm
width
= 86 mm
depth
= 34 mm
- Colour: White
- Class lll
- IP 30
•
Outside temperature sensor:
- Installed in a box with cable gland.
Note
:
This sensor must be installed in a
location that is sheltered from
inclement weather. See details in
paragraph 5.2.
K60D070Z
APPlICATIONs
K60D070ZA
K60D070ZB
- 1 Floor Zone.
- 2 Floor Zones.
- 1 Terminal Units Zone.
- 1 Radiators Zone.
- 2 Mixed Zones, Floor + Terminal Units.
- 2 Mixed Zones, Floor + Radiators.
- 1 Floor Zone with Domestic Hot Water preparation.
- 1 Radiators Zone with Domestic Hot Water preparation.